XS3035 - Gen 3 Flaring Set

Full Gen 3 Drag Bike Fairing Set 
 
Requires trimming and gluing sides to the top section. For best results, use Shoe Goo. You can also drill out the marked holes in the recesses for small screws to pull the pieces together and ensure good glue contact.

Maintenance & Longevity Tips:
Heat/Wear Protection: Due to the nature of the product, we recommend lining the inside of the body with aluminum foil tape to prolong its life.
Prevent Cracking: Make sure to sand all cut edges smoothly to help reduce the risk of cracking.
Remember to remove the overspray film after painting and before joining the sides to the main section!
 
Due to nature of the product it is recommended to line inside of body with aluminum foil tape to prolong the life of body,Please also ensure to sand all cut edges to help reduce cracking